SAKER 800W Electric Handheld Router for Woodworking
Shop now, pay later
How it works:
Select one of the following payment methods to shop now, pay later:
Pay in 4 installments with
Pay in 4 interest-free installments with
Afterpay: You must be over 18, a resident of the U.S. and meet the additional criteria to qualify. Late fees may apply. Loans to California residents made or arranged are pursuant to a California Finance Lenders Law license.
Klarna: You must be a resident of the United States or its territories. You must have full legal capacity to enter into a contract and be at least 18 years old or of legal age in your state of residence.
- Precio unitario
- por
¡COMPRE MÁS AHORRE MÁS!
| Cantidad mínima (artículos superiores a $20) | Descuento extra |
|---|---|
| +2 | 5% DE |
| +3 | 10% DE |
| +4 | 15% DE |
FEATURES
Moving the tool forward too quickly may result in poor cutting quality. or damage to the tool or motor, While moving it too slowly may cause heating and inadequate cutting performance. The appropriate feed rate will depend on the size of the tool, type of workpiece, and cutting depth. Before cutting on an actual workpiece, it is best to first try a test cut on a piece of scrap wood. This will accurately tell you the cutting performance and allow you to check the dimensions.
Due to excessive cutting that can cause motor overload or tool uncontrollability, when performing groove cutting. Multiple passes can be carried out to achieve a deeper cutting purpose.
15 PCS 1/4'' ROUTER BITS SET
DETAILS OF THE ROUTER TOOL
Regularly remove the carbon brushes for inspection. When the carbon brush is worn down to the limit wear line, it needs to be replaced. The carbon brush should be kept clean to ensure that it can slide freely into the carbon brush holder.
MULTIFUNCTIONS
Circular cutting Align the center of the circle to be cut with the center hole on the straight guide plate. Knock a nail with a diameter of less than 6mm into the center hole to secure the straight guide. Rotate the tool clockwise around the nail.
Using a trimming guide can conveniently trim and cut curves on the thin plates of decorative surfaces of furniture and similar objects. The guide rail moves on the curve to ensure fine cutting.
ONE MULTI-PURPOSE ROUTER TOOL
The electric trimmer widely used in wood processing, furniture manufacturing,handicraft production, plastic sheeting, cabinet processing, wood veneer and other similar materials grooving, chamfering, surface finishing,planning wood edge, curve cutting, pattern processing activities.
With this electric trimmer, make it smooth in the woodworking. for woodworking beginners and of course works well for pro woodworkers!
PRODUCT PARAMETER
- Main material: ABS + Aluminum
- Rated voltage: 110V
- Rated input power: 800W
- No-load speed: 30000rpm/min
- Horsepower: 1.25 HP
- Collet chuck diameter: 6.35mm / 0.25in
- Item weight: 1.35kg / 2.98lb
- Item size: 200* 90* 85mm / 7.87* 3.54* 3.35in
Notifications:
1. After operating,please make sure the machine is switched OFF
2. Please be cautious while using the machine,wearing protective glasses and prevent harm from flying dust.Keep it away from children
3. Check regularly and replace the carbon brush after it used up,should choose the same carbon brush for replacement
PRODUCT PARAMETER
- Main material: ABS + Aluminum
- Rated voltage: 110V
- Rated input power: 800W
- No-load speed: 30000rpm/min
- Horsepower: 1.25 HP
- Collet chuck diameter: 6.35mm / 0.25in
- Item weight: 1.35kg / 2.98lb
- Item size: 200* 90* 85mm / 7.87* 3.54* 3.35in
Notifications:
1. After operating,please make sure the machine is switched OFF
2. Please be cautious while using the machine,wearing protective glasses and prevent harm from flying dust.Keep it away from children
3. Check regularly and replace the carbon brush after it used up,should choose the same carbon brush for replacement